You are here

The 10 Best Resources For Repairs

Tips to Maintaining Your Swimming Pool

If you own a swimming pool, then you have to make sure that it is always clean, and this task is not as difficult as your think. Pools are different from each other and so are their preservation needs. Frequent, routine care is necessary for a healthy and clean swimming pool. If you want to prevent certain issues or having damaged equipment, then you should seek guidance from a pool maintenance guide before doing anything else. Doing regular pool maintenance will free you from anything that will cause annoyance and emergency trips to the store for supplies. Hiring a professional to clean your swimming pool is a great idea, but you don’t just give all the responsibility to them because you still need to do a few things to ensure that your pool remains in good condition for a long time.

Here are some guides for pool maintenance.

During the summer, it is beneficial if you observe your pool chemistry at least twice a week and during the winter at least once a week. A winterized pool will not need to be tested during the winter months. It is still possible for algae and bacteria to grow even if it is very cold outside. Your pool should be shocked every 6 weeks or so during months.

Make sure you check the water level once every month and adjust as required. Make sure that the water level is at the middle of the skimmer. If your water level is too high, it can create poor water circulation and movement and this makes it more challenging.

You need to scrub your walls and tiles regularly. If you want to eliminate algae, then you need to scrub your walls regularly. You can have money savings if your tiles are always clean. Algae likes to stick to walls and steps. So, keep them clean.

It is important to replace all broken or misplaced drains and suction supplies. This is something you should do if you want a well maintained swimming pool. Air is sucked into the system if there is a suction side leak at the pump. To verify this, run the equipment and look at the after coming out of your water lines. If you see a lot of bubbles, then this indicates excessive air is getting into the system. Your pump can dry dry and freeze if too much air gets into the system. You will need to replace this and it can be very expensive.

Make sure the pH level of you pool does not go above 8.0. To use the maximum potential of the chlorine in the pool you need to always check the pH level of the pool. Below 7.2 pH, the chlorine will not longer be as effective. Even if you add more chlorin, you will not benefit from it in the same way. This results in throwing away money.

Case Study: My Experience With Maintenance

Repairs: 10 Mistakes that Most People Make